How To Set Up A Lacrosse Weather Station
A few months agone I received a new wireless weather condition station for the RV. Our onetime one an Acurite works well merely is quite bones. It reports inside and outside temperature and barometric pressure. I was ready for a footstep up when I saw a La Crosse wireless weather station with a wind speed monitor at Canadian Tire. It was on sale for 69.95 CAD ( about $56 USD). Being close to my birthday I hinted to Anne about it, and she got it for me. 🙂
The La Crosse model CA87092 has a 3 in 1 remote wireless sensor reporting wind speed, humidity, and temperature. The inside display unit features large characters and colored readout. Y'all can check out its many other features, get specs and download the owners transmission on the product page at the La Crosse Technology website.
Installing My RV Weather Station
The Outside Wind, Temp and Humidity Sensor Unit
Because the new weather station reported current of air speed, it had to exist mounted in a suitable location. The roof was an obvious pick. The unit came with a plastic mounting subclass and four wood screws. The bracket gets mounted first and then the wind speed sensor slides on, held in identify past two set screws.
To avoid drilling whatever more holes in the RVs roof, I decided to spiral the mounting subclass into an existing plastic junction box lid. The junction box is used to run wires inside the rig from my back upwards photographic camera and my cell booster antenna. I drove the wood screws into the junction box lid and then covered it all up with a healthy dose of Dicor Self Leveling Lap Sealant.
The screws and sealant give the mount plenty of strength to hold the wind sensor in place. Only, I don't leave the sensor in place during transit. The sensor has a fair amount of weight to it. I'd hate to have information technology come off and cause damage or an accident on the road. I add and remove it at each camp. Information technology's now included on our arrival and departure checklists.
The Inside Display Panel
The display tin can be wall mounted or sit down on a table or shelf using a built-in kickstand. I elected to wall mount in adjacent to our Furnace/Ac thermostat using two screws in the wall paneling. I figured it was an excellent location for measuring the ambient inside temperature. Also, it'due south hands viewable while getting set for the day in the bathroom/bedchamber area.
Powering the Weather Station
One problem I confront is the ability supply. The La Crosse unit runs off of a 5 VAC wall wart. Nosotros off grid camp a lot and then having to have the inverter running just to power a conditions brandish is a scrap of a pain and wasteful. I have decided for the time being to use the 3 AAA fill-in power batteries to run it. Seems to work fine that fashion, though the backlight goes out in seconds.
My hereafter plan is to install a 12V to 5V DC to DC converter so the display can be powered off the rigs 12VDC battery banking concern. The outside sensor uses two C size batteries. Battery life has been pretty good so far. I've changed them twice in 4 months of use.
UPDATE – I install what's chosen a cadet converter to ability my weather station. Check out the mail and video.
Things I Don't Like
This La Crosse weather station is packed with features and fair value for the coin I paid, however, at that place are a few things I don't like.
- Display Viewing Angle – Unless you are pretty well eye level with the display it is challenging to read. Making low or high mounting impossible.
- Accurateness – I've read several online reviews stating the windspeed accuracy isn't cracking. I've personally found the hereafter forecast feature is so inaccurate as to exist useless.
- Outside Sensor Build Quality – You get what you pay for, and the outside sensor construction shows it. It's inexpensive plastic and doesn't give me much confidence information technology will endure a long fourth dimension.
- Missing Barometric Pressure level – I would accept expected this to be included.
Video Look at My RV Weather Station
I think the La Crosse weather condition station has been a decent plenty introductory organisation for me. I have enjoyed having it on the rig, but I hunger for something a little more than sophisticated now. If you take any recommendations on a system that doesn't pause the banking company, say in the $100 range, permit me know in the comments for this video on the Love Your RV! YouTube channel. Thanks! Ray
Update March 12th, 2022 – Needed Clean and Lube
In this video, I completely disassemble my La Crosse TX144W weather station external sensor array. Over the concluding couple of years, the wind speed anemometer vane has become increasingly noisy.We started to hear rattling and squeaking inside the rig. Once autonomously the trouble became apparent. Desert sand and grit had worked its way inside and was affecting the operation of a pair of steel bearings.
A practiced cleaning and lube of the bearings and bearing surfaces solved the issue. Beingness curious I too opened up the casing containing the individual sensors for wind speed, temperature, and humidity plus the controller and wireless circuit board.
Similar Lacrosse Weather Stations on Amazon:
- https://amzn.to/2F0whBL
- https://amzn.to/2EUs2HK
- https://amzn.to/2O3QBX
Source: https://www.loveyourrv.com/installed-la-crosse-weather-station-wind-speed-rv/
0 Response to "How To Set Up A Lacrosse Weather Station"
Post a Comment